PRODUCTS
  New Products
  MOON Evolution Series
  MOON Series
  Older Products
    Celeste Index
 
      PW-4070i / 4000
      PW-5000
      P-4001 / 4002
      P-5002
      P-5003
      HT-2 / HT-3 / HT-5
      W-4070se
      W-4150se
      W-4250se

 
INFORMATION
  Simaudio News
  Press Releases
  Product Awards
  Product Reviews
  Education
  Literature
  Recommended Music

 
COMPANY
  Background
  Green Practices
  Factory Tour
  Photo Gallery
  Unauthorized Sales
  Career Opportunities
  Contact Us

 
SUPPORT
  Where To Buy
  Product Registration
  Warranties
  Owner's Manuals
  F A Q
  Factory Upgrades
  Service
Celeste P-5002 Dual-Mono Preamplifier                   July 14, 2003


Celeste P-5002 Front View Celeste P-5002 Rear View
Celeste P-5002 Inside View




The P-5002 Celeste reference level preamp featured many of the characteristics found in our MOON P-5 preamplifier, including a very short signal path, a discrete shunt-to-ground gain stage, fully balanced dual-mono circuitry and a home theater ready input which bypasses the gain section.

Celeste PS-5002 Inside View




Also included was an over-sized outboard power supply (pictured to the right and bottom) which used a pair of XLR connectors to drive the separate analog and digital controller circuitry, thus allowing for a very low noise floor and excellent transparency.

Celeste PS-5002 Front View Celeste PS-5002 Rear View


Specifications
Production Dates 1996 - 1998
Type Solid State
Configuration Dual Mono
Power Supply Transformer(s) .5KVa
Power Supply Capacitance 70,000 micro-farads
Class Of Operation Single Ended Class A
Design Fully Balanced
Remote Control Full Function
Single-ended inputs (RCA) 5 pairs
Balanced Inputs (XLR AES-EBU) 1 pair
Input Device Types J-FET
Input Impedance 50Kohms
Input Sensitivity 300mV - 3.0V RMS
Tape output 1
Output Device Types MOSFET
Balanced Outputs (XLR) 1 Pair
Single-Ended Outputs (RCA) 1 Pair
Output Impedance - Balanced 60 ohms
Output Impedance - Single Ended 120 ohms
Gain Control RBG ry (fully discrete)
Gain - Balanced 12dB
Gain - Single Ended 8dB
Signal-to-noise Ratio >94dB
Maximum Output Voltage - XLR 10
Maximum Output Voltage - RCA 5
Bandwidth (+0 / -0.2dB) 20hz-20Khz
Crosstalk @ 1Khz -60dB
IMD unmeasurable
THD (20hz-20Khz) <0.03%
Headphone output None
Phono Section - Optional IPS - external
AC Power Requirements 120v / 60hz 240v / 50hz
Number of Chassis 2
Warranty 5 years
Shipping Weight 26 lbs.
Dimensions 17 x 2.75 x 15.5 in.
 
IPS Phono Section Specifications MM / MC
Input Sensitivity   (for 1V output) 2.5mV / 200µV
Bandwidth  ±0.3dB 20Hz - 20kHz
Gain 40dB / 56dB
Crosstalk   (20Hz - 20kHz) 98dB
THD < 0.05
Maximum input level   (at 1kHz) 200mV / 20mV
S/N Ratio 81dB / 72dB
Input Impedance 47k ohms / 1k ohms
Max. output (1kHz @ 10Kohms) 3V / 3V
Dimensions 5 x 3 x 10 in

 

 
Point-and-click here to return to the top of this page