|
|
|
Celeste PW-5000 Integrated Amplifier
July 14, 2003
|
| Production Dates |
1996 - 1999 |
| Type |
Solid State |
| Configuration |
Dual Mono (partial) |
| Power Supply Transformer |
0.5kVA |
| Power Supply Capacitance |
40,000µF |
| Class of operation - Preamplifier |
A |
| Class of operation - Amplifier |
A/AB |
| Remote Control |
Full Function |
| Single Ended Inputs (RCA) |
6 |
| Input Device Types - preamp |
J-FET |
| Output Device Types - preamp |
MOSFET |
| Input Sensitivity |
350mV - 3.0V RMS |
| Input Impedance |
30,000 ohms |
| Tape Monitor Loop |
1 |
| Preamplifier Output |
1 |
| Output Device Types - Amp |
Bipolars - 2 per channel |
| Output Binding Posts |
1 pair per channel |
| Output Power @ 8 ohms |
60 Watts per channel |
| Output Power @ 4 ohms |
110 Watts per channel |
| Output Impedance |
0.015 ohms |
| Damping Factor |
> 500 |
| Gain Control |
RBG cs version |
| Gain |
33dB |
| Dynamic Headroom |
6dB |
| Signal-to-noise Ratio |
97dB |
| Maximum Output Voltage |
22 |
| Slew Rate |
12V/µs |
| Maximum Current - Peak |
15 amperes |
| Bandwidth +0/-3dB |
10Hz - 60kHz |
| Crosstalk @ 1kHz |
-50dB |
| IMD |
unmeasurable |
| THD (20Hz - 20kHz @ 1 watt) |
< 0.09% |
| Phono Section - Optional MM/MC |
IPS - external |
| Power Consumption @ idle |
40 Watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Shipping weight |
20 lbs |
| Dimensions |
17 x 3 x 15 in |
| IPS Phono Section Specifications |
MM / MC |
| Input Sensitivity (for 1V output) |
2.5mV / 200µV |
| Bandwidth ±0.3dB |
20Hz - 20kHz |
| Gain |
40dB / 56dB |
| Crosstalk (20Hz - 20kHz) |
98dB |
| THD |
< 0.05 |
| Maximum input level (at 1kHz) |
200mV / 20mV |
| S/N Ratio |
81dB / 72dB |
| Input Impedance |
47k ohms / 1k ohms |
| Max. output (1kHz @ 10Kohms) |
3V / 3V |
| Dimensions |
5 x 3 x 10 in |
|
