MOON Series
300D v.2 Digital-to-Analog Converter
Versatile ...            
Astonishing ...
            Musical ...

Fully asynchronous
24-bit/192kHz
USB performance!
MOON 300D Silver MOON 300D Black

The MOON 300D v.2 Digital-to-Analog Converter features an exceptionally versatile external interface that allows for use with a computer, via its USB-B input, as well as other digital audio source components such as a music server, digital transport, etc. though either S/PDIF or optical TosLink connectors. Intended to fulfill the demands of the discerning music aficionado, the 300D v.2 will bring new life to all of your digital audio files, regardless of their storage format.

With internal upsampling using 24-bit/352.8kHz processing, the 300D v.2 will reproduce your digital music in a genuine life-like fashion. This DAC will accept an input signal ranging from 44.1 to 192kHz, with a bit-depth range from 16 to 24-bits across all inputs. Jitter is a virtual non-issue thanks to our highly regarded proprietary digital clocking system. The back panel features a total of 4 digital inputs (USB, SPDIF x 2,and TosLink) and both balanced (XLR) and single-ended (RCA) analog outputs. The balanced outputs provide a significant improvement in noise floor, dynamics and midrange transparency.

Sonically, it portrays all of the MOON hallmarks: clean, powerful, fast and extended bass combined with an open midrange and airy extended high frequencies. Like other MOON series components, the MOON 300D v.2 includes an IR input, an over-built power supply and is housed in a extremely rigid custom-made chassis with a 3/8" brushed and anodized front panel.

300D Photo Gallery

Inside view of the 300D
 
Rear view of the 300D
 

300D Technical Features

· Over-sized power supply with 8 stages of voltage regulation
· Internal upsampling which uses 24-bit/352.8kHz processing
· BurrBrown PCM1793 high-resolution 24-bit/192-kHz D/A and 8X oversampling digital filter
· All inputs accept a signal up to 24-bit/192kHz resolution
· IR input for external control
· Asynchronous Sample Rate Converter for exceptionally low intrinsic jitter levels
· Single-ended RCA and Balanced XLR analog outputs
· Advanced analog signal path using a DC servo circuit and proprietary analog filter
· Extremely rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the very finest high quality electronic components in a symmetrical circuit design
· Designed to be powered up at all times for optimal performance
 
300D Detailed Specifications
Configuration Balanced, 2-channel
Front Panel Controls Standby · Input Selector
Front Panel LED Indicators Sampling Frequency · Active Input
DAC / Digital Filter BurrBrown PCM1793
Digital Inputs (4) S/PDIF (RCA) x 2   USB x 1   TosLink x 1
Bit-depth range 16 - 24 bits
Sampling Frequency Rate range 44.1 - 192kHz   (up to 96kHz for TosLink)
Frequency Response   (audible) 20Hz - 20kHz   +0/-0.2dB
Frequency Response   (full range) 2Hz - 72kHz   +0/-3dB
THD @ 1kHz, 0dBFS   (A-weighted) < 0.001 %
IMD < 0.004 %
Dynamic Range > 116dB
Signal-to-noise ratio > 115dB @ full output
Slew Rate 50V/µs
Channel Separation > 115dB
Low Level Linearity < ±1.0dB to below 120dBFS
Intrinsic Jitter < 25 picosecond RMS
Analog Outputs - Balanced 1 pair XLR
Analog Output - Single-ended 1 pair RCA
Max. Analog Output @ 0dBFS - RCA & XLR 2.0 Volts
Analog Output Impedance - RCA & XLR 100Ω
IR input 1/8" mini-jack
Available Faceplate Finishes Black and Silver
Power Consumption @ idle 5 watts
AC Power Requirements 120V / 60Hz   220-240V / 50Hz
Fuse Replacement   120V   /   220-240V 200mA short slow blow   /   100mA short slow blow
Shipping weight 7 lbs / 3 Kgs
Dimensions   (w x h x d) 7.5 x 3.25 x 11 in.   (19 x 8 x 28 cm.)
  Specifications are subject to change without notice.