| Type |
Solid State |
| Configuration |
Stereo |
| Design |
Balanced Differential |
| Single-ended inputs (RCA) |
4 pairs |
| Balanced Inputs (XLR) |
2 pairs |
| Mini-jack Input (1/8") |
1 |
| Input Impedance |
22,000 Ω |
| Input Sensitivity |
200mV - 10.0V RMS |
| Balanced Outputs (XLR) |
1 Pair |
| Single-Ended Outputs (RCA) |
2 Pairs (fixed & variable) |
| Output Impedance |
100 Ω |
| Gain |
6dB |
| Signal-to-noise Ratio |
120dB @ full output |
| Maximum Output Voltage - XLR / RCA |
16 Volts / 8 Volts |
| Audible Frequency Response |
20Hz - 20kHz (± 0.1dB) |
| Full-Range Frequency Response |
5Hz - 100kHz (+0 / -3.0dB) |
| Crosstalk @ 1kHz |
< -96dB |
| IMD |
unmeasurable |
| THD (20Hz - 20kHz) |
< 0.0005% |
12 Volt Trigger Output Operation
|
Direct Logic (0V = off, 12V=on) using a 3.5mm
mono microphone jack with an output impedance
of 1000 Ω and current requirement of 12mA |
| SimLink Port |
1 input + 1 output each on 1/8" mini-jack |
| RS-232 Port |
9-pin female DB connector |
| IR input |
1/8" mini-jack |
| Available Faceplate Finishes |
Black and Silver |
| Remote Control |
CRM-2 Full Function |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Power Consumption idle |
12.5 watts |
| Fuse Replacement - 120V |
0.2A slow blow |
| Fuse Replacement - 230V |
0.1A slow blow |
| Shipping Weight |
16.5 lbs / 7.5 kgs |
| Dimensions (W x H x D) |
16.88 x 3.5 x 13.1 in. (42.9 x 8.9 x 33.3 cm.) |
| Optional Digital-to-Analog Converter:
|
| |
|
| Digital Input Types |
S/PDIF (RCA) x 2 USB x 1 TosLink x 1 |
| Digital Input Impedance S/PDIF |
75 Ω @ 0.5 Volts |
| DAC / Digital Filter |
BurrBrown PCM1793 |
| Bit-depth range - S/PDIF, Toslink |
16 - 24 bits |
| Bit-depth range - USB |
16 bits |
| Sampling Frequency Rate range - S/PDIF, Toslink |
32, 44.1, 48, 88.2, 96, 176.4 and 192kHz |
| Sampling Frequency Rate range - USB |
32 - 48kHz |
| Frequency Response (audible) |
20Hz - 20kHz +0/-0.2dB |
| Frequency Response (full range) |
2Hz - 72kHz +0/-3dB |
| THD @ 1kHz, 0dBFS (A-weighted) |
< 0.001 % |
| IMD |
< 0.004 % |
| Dynamic Range |
> 116dB |
| Signal-to-noise ratio |
> 115dB @ full output |
| Slew Rate |
50V/µs |
| Channel Separation |
> 115dB |
| Low Level Linearity |
±1.0dB to below 120dBFS |
| Intrinsic Jitter |
< 25 picoseconds RMS |
| |
|
| Input Impedance - Adjustable |
100 Ω and 47K Ω |
| Input Capacitance - Adjustable |
0pF and 100pF |
| Gain - Adjustable |
40dB and 60dB |
| Input overload @ 40dB gain |
58mV RMS |
| Input overload @ 60dB gain |
3mV RMS |
| Signal-to-noise Ratio (full scale @ 40dB gain) |
107dBr |
| Signal-to-noise Ratio (full scale @ 60dB gain) |
85dBr |
| Frequency Response |
20Hz - 20kHz (±0.5dB) |
| Crosstalk @ 1kHz |
-97dB |
| IMD |
< 0.009% |
| THD (20Hz - 20kHz) |
< 0.001% |
Features & specifications are subject to change without notice.
|
