LEGACY PRODUCTS
MOON Series
360D / CD3.3 Disc Player
Launched: 2009
Discontinued: 2013
MOON 360D Silver MOON 360D Black

Breathe new life into your digital music collection.
The MOON 360D Disc Player, companion source component for the 340i Integrated Amplifier, embodies many of the revolutionary technologies found in our highly acclaimed MOON disc players. The 360D uses state-of-the-art digital and analog circuitry to produce astonishing sonic performance with no equal in its class.

With features including a digital input for use with a PC, music server or stand-alone transport, optional balanced analog outputs, a fully customized CD transport mechanism, numerous interfaces for external control and a luxurious build quality, the MOON 360D will provide for many years of listening pleasure and hassle-free use.

360D Photo Gallery

Inside view of the 360D
 
Rear view of the 360D
 
 
Close-up view of the M-Quattro gel-based floating suspension
 

360D Technical Features

· Ultra-low noise toroidal transformer driven power supply with 10 stages of DC voltage regulation
· CD drive system mounted on our revolutionary M-Quattro gel-based 4-point floating suspension for
  vibration damping, allowing ambient and spatial cues in your recordings to come to life like never before
· Digital Audio Signal Processing using M-AJiC (MOON Asynchronous Jitter Control)
· Internal upsampling with 24-bit/1.411MHz processing
· BurrBrown PCM1798 high-resolution 24-bit/192kHz DAC and 8x oversampling digital filter
· All digital and analog audio circuitry mounted on a single circuit board, each with their own
  respective ground plane, to minimize signal path lengths and eliminate any potential for
  interference and signal degradation
· Alpha Clocking System with PLL synchronization yielding under 25 picoseconds of jitter
· Advanced analog signal path using a DC servo circuit and proprietary 18dB/octave analog filter
· RS-232 port for (i) full unsolicited bidirectional feedback and (ii) firmware updates
· IR input for external control
· SimLink™ controller port for 2-way communications with other compatible MOON components
· PCB w/ pure copper tracings & gold plating that yields low impedance characteristics
· Rigid chassis construction to minimize the effects of external vibrations
· Optimized selection of very high quality electronic components in a symmetrical circuit design
· Designed to be powered up at all times for optimal performance
· Includes CRM-2 remote control.
 
360D Detailed Specifications
Configuration Single-ended
Transport Mechanism Proprietary Design
Front Panel Controls Standby · Display · Time · Input · Repeat · Stop ·
Program · Random · Play · Pause · Open/Close · Scan/Skip Backward · Scan/Skip Forward
Front Panel Display Track number ·
Time - elapsed or remaining   (track / disc)
Front Panel LED Indicators Program · Repeat - current track ·
Repeat - entire disc · Random
DAC / Digital Filter BurrBrown PCM1798
Frequency Response   (audible) 20Hz - 20kHz   +0/-0.2dB
Frequency Response   (full range) 2Hz - 72kHz   +0/-3dB
THD @ 1kHz, 0dBFS   (A-weighted) < 0.001 %
IMD < 0.004 %
Dynamic Range > 116dB
Signal-to-noise ratio > 115dB @ full output
Slew Rate 50V/µs
Channel Separation > 115dB
Low Level Linearity < ±1.0dB to below -120dBFS
Intrinsic Jitter < 25 picoseconds RMS
Single-ended Analog Outputs 1 pair RCA
Max. Analog Output @ 0dBFS - RCA 2.0 Volts @ 100Ω
Optional Balanced Analog Outputs 1 pair XLR
Optional Max. Analog Output @ 0dBFS - XLR 4.0 Volts @ 50Ω
Digital Input S/PDIF (RCA)
Digital Input Impedance   S/PDIF 75Ω @ 0.5p-p
Digital Output S/PDIF (RCA)
Digital Output Impedance   S/PDIF 75Ω @ 0.5p-p
SimLink™ Port 1 input + 1 output each on 1/8" mini-jack
RS-232 Port 9-pin female DB connector
IR input 1/8" mini-jack
Remote Control CRM-2 Full Function
Power Consumption @ idle 15 watts
AC Power Requirements 120V / 60Hz   220-240V / 50Hz
Fuse Replacement   120V   /   220-240V 200mA short slow blow   /   100mA short slow blow
Shipping weight 18 lbs / 8 kgs
Dimensions   (W x H x D) 16.9 x 3.5 x 13.1 in.   (42.9 x 8.9 x 33.3 cm.)
  Specifications are subject to change without notice.