| Type |
Solid State |
| Configuration |
Differential Mono |
| Power Supply Transformer |
400VA |
| Power Supply Capacitance |
85,000µF |
| Class Of Operation |
A/AB |
| Single-ended Input |
RCA - 1 |
| Balanced Input |
XLR - 1 |
| Input Device Type |
J-FETs |
| Input Impedance |
47,500 Ω |
| Input Sensitivity |
800mV RMS |
| Output Device Type |
Bipolars - 8 |
| Output Binding Posts |
5-way / Gold-plated / Shielded |
| Output Power @ 8 Ω |
400 Watts |
| Output Power @ 4 Ω |
650 Watts |
| Frequency Response |
10Hz - 125kHz (+0/-3dB) |
| Output Impedance |
0.01 Ω |
| Damping Factor (static) |
800 |
| Gain |
36dB |
| Signal-to-noise Ratio |
> 106dB @ full power |
| Maximum Output Voltage |
70 Volts |
| Slew Rate |
60V/µs |
| Maximum Current - Peak / Continuous |
56 amperes / 26 amperes |
| IMD |
Unmeasureable |
| THD @ 1 watt / @ 400 watts (20Hz-20kHz) |
< 0.02 % / < 0.05 % |
12 Volt Trigger Operation
|
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
1K Ω and current requirement of 12mA |
| Available Faceplate Finishes |
Black and Silver |
| Power Consumption @ idle |
36 Watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Fuse Replacement - 120V |
6A long fast blow |
| Fuse Replacement - 230V |
3A long fast blow |
| Shipping weight |
33 lbs / 15 Kgs |
| Dimensions (W x H x D) |
16.9 x 3.5 x 14.0 in. (42.9 x 8.9 x 35.6 cm.) |
Features & specifications are subject to change without notice.
|
