MOON EVOLUTION SERIES

700i Integrated Amplifier   Specifications

 
 
Type Solid State
Configuration Dual-Mono / Balanced
Class of operation - Amplifier A/AB
Single Ended Inputs   (RCA) 5 pairs
Balanced Inputs   (XLR) 1 pair
Input Sensitivity 490mV - 6.0V RMS
Input Impedance 23,700 Ω
Monitor Loop 1
Preamplifier Output 1 pair @ 50 Ω   (RCA)
Output Device Types - Amplifier Proprietary MOON BiPolars - 6 per channel
Output Binding Posts Gold-plated WBT
Output Power @ 8 Ω 175 Watts per channel
Output Power @ 4 Ω 350 Watts per channel
Output Impedance 0.02 Ω
Damping Factor > 400
Volume Steps 0.5 dB from 0-30 and 0.1dB from 30-80
Gain Control M-eVOL2
Gain 37dB
Signal-to-noise Ratio - Preamplifier 120dB   (20Hz-20kHz)
Signal-to-noise Ratio - Amplifier 105dB @ full power
Maximum Output Voltage 45 Volts
Slew Rate 35V/µs
Maximum Current - Peak 42 amperes
Maximum Current - Continuous 22 amperes
Frequency Response 10Hz - 100kHz   (+0/-3dB)
Crosstalk @ 1kHz -102dB
IMD unmeasurable
THD   (20Hz - 20kHz @ 1 watt) < 0.015%
THD   (20Hz - 20kHz @ 175 watts) < 0.04%

 
12 Volt Trigger Output Operation
 
 
Direct Logic   (0V = off, 12V=on)   using a 3.5mm
mono microphone jack with an output impedance
of 1000 Ω and current requirement of 12mA
SimLink Port 1 input + 1 output each on 1/8" mini-jack
RS-232 Port 9-pin female DB connector
IR input 1/8" mini-jack

 
Remote Control All-Aluminum Full Function
Display Type 8 character dot matrix LED
Power Consumption @ idle 50 Watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 6.0A long fast blow
Fuse Replacement - 230V 3.0 long fast blow
Shipping weight 60 lbs / 27 kgs
Dimensions   (w x h x d) 18.8 x 5.4 x 18.1 in.

          Features & specifications are subject to change without notice.


Open printer friendly PDF                               Close this window