| Type |
Solid State |
| Configuration |
Mono / Fully Balanced |
| Power Supply Transformers |
2 x 1.3kVA |
| Power Supply Capacitance |
240,000µF |
| Class Of Operation |
A/AB |
| Balanced Input |
XLR - 1 |
| Single-ended Input |
RCA - 1 |
| Input Device Type |
J-FETs |
| Input Impedance |
47.5 KΩ |
| Input Sensitivity |
2250mV RMS |
| Output Device Type |
Bipolars - 32 |
| Output Binding Posts |
WBT - 2 pairs |
| Output Power @ 8 Ω |
800 Watts |
| Output Power @ 4 Ω |
1600 Watts |
| Frequency Response |
10Hz - 200kHz (+0/-3dB) |
| Output Impedance |
< 0.004 |
| Damping Factor (static) |
> 2000 |
| Gain |
31dB |
| Signal-to-noise Ratio |
106dB @ full power |
| Maximum Output Voltage |
80 Volts |
| Slew Rate |
70 V/µs |
| Maximum Current - Peak |
100 amperes |
| Maximum Current - Continuous |
42 amperes |
| Crosstalk @ 1kHz |
Not applicable |
| IMD |
Unmeasureable |
| THD (20Hz - 20kHz @ 1 watt) |
0.015 % |
| THD (20Hz - 20kHz @ 500 watts) |
0.04 % |
12 Volt Trigger Operation
|
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
1K Ω and current requirement of 12mA |
| RS-232 Port |
9-pin female DB connector |
| Power Consumption @ idle |
48 watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Fuse Replacement - 120V |
10A long fast blow |
| Fuse Replacement - 230V |
5A long fast blow |
| Shipping weight |
92 lbs / 42 kgs |
| Dimensions (w x h x d) |
18.75 x 7.5 x 17.5 in. |
Features & specifications are subject to change without notice.
|
