MOON i-5080 Stereo Integrated Amplifier   Specifications

 
Type Solid State
Configuration Stereo
Power Supply Transformer 0.5kVA
Power Supply Capacitance 40,000µF
Class of operation - Preamplifier A - Feedback Differential
Class of operation - Amplifier AB - no feedback
Single Ended Inputs   (RCA) 6
Input Device Types - preamp J-FET
Input Sensitivity 250mV - 3.0V RMS
Input Impedance 12,000 ohms
Tape Output 1
Preamplifier Output 1
Output Device Types - Amp Bipolars - 4 per channel
Output Binding Posts 1 set per channel
Output Power @ 8 ohms 80 Watts per channel
Output Power @ 4 ohms 140 Watts per channel
Output Impedance 0.05 ohms
Damping Factor > 160
Gain Control RBG cs version
Gain 34dB
Dynamic Headroom 6dB
Signal-to-noise Ratio 95dB @ full power
Maximum Output Voltage 26 Volts
Slew Rate 20V/µs
Maximum Current - Peak 20 amperes
Maximum Current - Continuous 11 amperes
Frequency Response 10Hz - 80kHz   +0/-3dB
Crosstalk @ 1kHz -60dB
IMD unmeasurable
THD   (20Hz - 20kHz @ 1 watt) 0.15%
 
Available Faceplate Finishes Black and Silver
Standard Remote Control All-Aluminum Simple Function
Optional Remote Control All-Aluminum Full Function
Optional Phono Section MOON IPS - external
Power Consumption @ idle 45 Watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 4A short fast blow
Fuse Replacement - 230V 2A short fast blow
Warranty   (USA & Canada) 10 Years
Shipping weight 22 lbs / 10 kgs
Dimensions   (W x H x D) 17 x 3 x 15.5 in.   (43 x 7.5 x 39 cm.)

    Features & specifications are subject to change without notice.

 
Close this window                             Print this page