MOON i5.3 Integrated Amplifier   Specifications

 
 
Configuration Dual Mono   (partial)
Class of operation - Preamplifier A
Class of operation - Amplifier A/AB
Single Ended Inputs   (RCA) 5 pairs
Input Device Types - preamp J-FET
Input Sensitivity 370mV - 3.0V RMS
Input Impedance 14,000 Ω
Tape Output 1 pair
Preamplifier Output 1 pair
Output Device Types - Amplifier Bipolars - 2 per channel
Output Binding Posts 5-way / Gold-plated / Shielded
Output Power @ 8 Ω 85 Watts per channel
Output Power @ 4 Ω 130 Watts per channel
Output Impedance 0.04 Ω
Damping Factor > 200
Gain Control RBG cs version
Gain 37dB
Dynamic Headroom 3dB
Signal-to-noise Ratio 97dB @ full power
Maximum Output Voltage 23.5 Volts
Slew Rate 20V/µs
Maximum Current - Peak 18 amperes
Maximum Current - Continuous 10 amperes
Frequency Response 10Hz - 70kHz   (+0/-3dB)
Crosstalk @ 1kHz -50dB
IMD unmeasurable
THD   (20Hz - 20kHz @ 1 watt) < 0.1%
THD   (20Hz - 20kHz @ 85 watts) < 0.15%

 
Available Faceplate Finishes Black and Silver
Remote Control All-Aluminum Full Function
Power Consumption @ idle 45 Watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 4A long fast blow
Fuse Replacement - 230V 2A long fast blow
Shipping weight 29 lbs / 13 kgs
Dimensions   17.0 x 3.9 x 16.2 in.   (43.2 x 9.9 x 41.2 cm.)

          Features & specifications are subject to change without notice.


Open printer friendly PDF                               Close this window