Simaudio MOON i-7 Dual-Mono Integrated Amplifier

The MOON i-7 integrated amplifier is a dual-mono fully balanced differential design, representing the next generation of MOON high-performance audio components. Using our new proprietary "Lynx" amplification circuit, the i-7 produces a high-current rock-solid 150 watts per channel into 8 ohms with absolutely no sonic colorations. A genuine non-compromising solution for those who don't require separate component systems, this integrated provides for astounding ease-of-use as a result of a variety of programmable features. Further raising the bar, the MOON i-7 can be fully integrated into a custom-install environment via an RS-232 port. As well, a plethora of user selectable cosmetic options are available at the time of purchase.

Significant Design Features:

· Full unsolicited RS-232 bidirectional feedback
· "Lynx" circuitry which is a "no overall feedback" design resulting in genuine real-time amplification,
more accurate musical reproduction with respect to tonality, virtually non-existent intermodulation
distortion and the elimination of common phase errors resulting from feedback
· Custom proprietary toroidal transformer design with lower magnetic, electrical and thermal loss,
yielding an improved power transfer and lower regulation factor. The result is increased current
speed and better dynamics
· An oversized dual-mono power supply
· SimLink controller port allows for 2-way communications between other compatible MOON
Evolution Series components
· M-eVOL volume control circuit based on a resistive array configuration with no sonic degradation
of the audio signal regardless of the selected volume setting
· M-Lock for “user selectable” maximum volume setting lock-out for each line input
· “Gain offset” for each individual line input with a ±10dB range
· Each line input is fully configurable to be “home-theater ready”, where the gain section of the
i-7 is bypassed
· 130 individual volume steps in 1dB and 0.5dB increments
· An exceptionally short signal path , yielding a much faster transient response
· 12 Volt trigger output for remote operation
· "Class A" output to 5 watts for greater efficiency
· Four-layer PCB tracings for a dramatically improved signal-to-noise ratio
· Ultra rigid chassis construction to minimize the effects of external vibrations
· Accurate matching of the very finest quality electronic components in a symmetrical
circuit design
· Improved reliabilty through the elimination of moving parts
· Low operating temperature for a longer than normal life expectancy.

MOON i-7 inside view

MOON i-7 rear view

Overseas MOON i-7 RS

The RS series of MOON audio components benefit from an even higher standard of manufacturing process than the regular MOON versions. All significant differences are contained within the circuitry and construction of each model.

RS versions are built using different materials and parts in certain areas. For example, printed circuit boards are of a higher temperature grade than that of the military specification FR-4 material we normally use; Their traces are gold-plated instead of a tin/lead composite. As well, all capacitors use improved dielectric materials.

MOON RS models meet and/or exceed stricter manufacturing processes as required to pass many international safety standards such as those imposed by the E-U, Japan and South Korea. Cosmetically, the ONLY difference is the RS logo on the front panel.

	View detailed specifications	Review list for the MOON i-7	Return to the top of this page
	View a print friendly version	Owner's Manual (226kB PDF)