|
|
MOON EVOLUTION SERIES
             
           
Updated: December 19, 2006
i-7 Dual-Mono Integrated Amplifier
|
|  
|
The MOON i-7 integrated amplifier is a dual-mono fully balanced differential design, representing
the next generation of MOON high-performance audio components. Using our new proprietary "Lynx"
amplification circuit, the i-7 produces a high-current rock-solid 150 watts per channel into
8 ohms with absolutely no sonic colorations. A genuine non-compromising solution for those who don't
require separate component systems, this integrated provides for astounding ease-of-use as a result of
a variety of programmable features. Further raising the bar, the MOON i-7 can be fully integrated
into a custom-install environment via an RS-232 port. As well, a plethora of user selectable cosmetic
options are available at the time of purchase.
"Celebrating Over 25 Years Of Excellence"
|
 
|
 
|
|
To view a larger detailed image of the MOON i-7 dual-mono Integrated Amplifier's rear panel, simply
point-and-click your mouse over the image located to the left.
|
 
|
|  
|
Overseas MOON i-7 RS
The RS series of MOON audio components benefit from an even higher standard of manufacturing process
than the regular MOON versions. All significant differences are contained within the circuitry and construction
of each model.
RS versions are built using different materials and parts in certain areas. For example, printed
circuit boards are of a higher temperature grade than that of the military specification FR-4 material
we normally use; Their traces are gold-plated instead of a tin/lead composite. As well, all capacitors
use improved dielectric materials.
MOON RS models meet and/or exceed stricter manufacturing processes as required to pass many
international safety standards such as those imposed by the E-U, Japan and South Korea. Cosmetically, the
ONLY difference is the RS logo on the front panel.
Point-and-click
here
to see the retail pricing structure for the MOON RS series
|
 
|
 
|
Specifications:
|
 
|
| Type |
Solid State |
| Configuration |
Dual-Mono / Balanced |
| Power Supply Transformer |
2 x 0.5kVA |
| Power Supply Capacitance |
66,800µF |
| Class of operation - Amplifier |
A/AB |
| Single Ended Inputs   (RCA) |
5 pairs |
| Balanced Inputs   (XLR) |
1 pair |
| Input Sensitivity |
490mV - 6.0V RMS |
| Input Impedance |
23,700 ohms |
| Monitor Loop |
1 |
| Preamplifier Output |
1 pair @ 50 ohms   (RCA) |
| Output Device Types - Amplifier |
Bipolars - 6 per channel |
| Output Binding Posts |
Gold-plated WBT |
| Output Power @ 8 ohms |
150 Watts per channel |
| Output Power @ 4 ohms |
250 Watts per channel |
| Output Impedance |
0.02 ohms |
| Damping Factor |
> 400 |
| Volume Steps |
1.0 dB from 0-30 and 0.5dB from 30-80 |
| Gain Control |
M-eVOL   (Resistive Array) |
| Gain |
37dB |
| Signal-to-noise Ratio - Preamplifier |
114dB   (20Hz-20kHz) |
| Signal-to-noise Ratio - Amplifier |
100dB @ full power |
| Maximum Output Voltage |
45 Volts |
| Slew Rate |
35V/µs |
| Maximum Current - Peak |
40 amperes |
| Maximum Current - Continuous |
20 amperes |
| Frequency Response |
10Hz - 100kHz   (+0/-3dB) |
| Crosstalk @ 1kHz |
-100dB |
| IMD |
unmeasurable |
| THD   (20Hz - 20kHz @ 1 watt) |
< 0.02% |
| THD   (20Hz - 20kHz @ 150 watts) |
< 0.05% |
12 Volt Trigger Output Operation
 
 
  |
Direct Logic   (0V = off, 12V=on)   using
a 3.5mm mono microphone jack with an
output impedance of 1000 ohms and current
requirement of 12mA |
| SimLink Port |
1 input + 1 output each on 1/8" mini-jack |
| RS-232 Port |
9-pin female DB connector |
| IR input |
1/8" mini-jack |
| Remote Control |
All-Aluminum Full Function |
| Display Type |
8 character dot matrix LED |
| Power Consumption @ idle |
50 Watts |
| AC Power Requirements |
120V / 60Hz     240V / 50Hz |
| Fuse Replacement - 120V |
6.0A long fast blow |
| Fuse Replacement - 230V |
3.0 long fast blow |
| Shipping weight |
58 lbs / 26 kgs |
| Dimensions   (w x h x d) |
18.75 x 5.5 x 16.5 in. |
|
 
|
Preliminary specifications - subject to change without notice.
|
 
|
|
 
|
|
C4 Aesthetics featuring 24 end-user selectable cosmetics combinations
|
|
Chassis Section
|
Standard finish
|
Optional finish
|
|
Brushed/Anodized Face-plate
|
Silver or Black
|
 
|
|
MOON Logo
|
Chrome
|
Gold or Pewter
|
|
Leg Cones
|
Chrome
|
Gold
|
|
Front Panel Cheeks
|
Silver
|
Black
|
|
 
|
|