MOON P5.3 Preamplifier   Specifications

 
 

Type	Solid State
Configuration	Dual Mono
Design	Open Loop / Balanced Differential
Single-ended inputs   (RCA)	4 pairs
Balanced Inputs   (XLR)	1 pair
Input Device Types	J-FET
Input Impedance	22,000 Ω
Input Sensitivity	200mV - 4.0V RMS
Balanced Outputs   (XLR)	1 Pair
Single-Ended Outputs   (RCA)	2 Pairs   (fixed & variable)
Output Impedance - XLR   /   RCA	100 Ω   /   50 Ω
Gain Control	M-eVOL
Gain	9dB
Signal-to-noise Ratio	109dB @ full output
Maximum Output Voltage - XLR   /   RCA	12 Volts   /   6 Volts
Frequency Response	5Hz - 100kHz   (+0 / -0.1dB)
Crosstalk @ 1kHz	< -110dB
IMD	unmeasurable
THD   (20Hz - 20kHz)	< 0.002%

12 Volt Trigger Output Operation	Direct Logic   (0V = off, 12V=on) using a 3.5mm mono microphone jack with a 1000 Ω input impedance of and current requirement of 12mA.
IR input	1/8" mini-jack

Available Faceplate Finishes	Black and Silver
Remote Control	All-Aluminum Full Function
AC Power Requirements	120V / 60Hz     240V / 50Hz
Power Consumption idle	6 watts
Fuse Replacement - 120V	0.2A slow blow
Fuse Replacement - 230V	0.1A slow blow
Shipping Weight	25 lbs / 11 kgs
Dimensions   (W x H x D)	17.0 x 3.9 x 15.3 in.   (43.2 x 10.0 x 38.8 cm.)

Optional Phono Section:

Input Impedance - Adjustable	100 Ω and 47K Ω
Input Capacitance - Adjustable	0pF and 100pF
Gain - Adjustable	40dB and 60dB
Input overload @ 40dB gain	58mV RMS
Input overload @ 60dB gain	3mV RMS
Signal-to-noise Ratio   (full scale @ 40dB gain)	107dBr
Signal-to-noise Ratio   (full scale @ 60dB gain)	85dBr
Frequency Response	20Hz - 20kHz   (±0.5dB)
Crosstalk @ 1kHz	-97dB
IMD	< 0.009%
THD   (20Hz - 20kHz)	< 0.001%