|
|
MOON EVOLUTION SERIES
             
           
Updated: December 19, 2006
P-7 Dual-mono Preamplifier
|
|  
|
The MOON P-7 preamplifier is a dual-mono fully balanced differential design, representing
the next generation of MOON high-performance audio components. Using several newly developed
proprietary technologies, this preamplifier yields absolutely no sonic colorations, an incredible
level of transparency, and a very impressive signal-to-noise ratio. Further raising the bar, the
MOON P-7 can be fully integrated into a custom-install environment via an RS-232 port. As well,
a plethora of user selectable cosmetic options are available at the time of purchase.
"Celebrating Over 25 Years Of Excellence"
|
 
|
 
|
|
To view a larger detailed image of the MOON P-7 dual-mono preamplifier and controller rear panels, simply
point-and-click your mouse over the image located to the left.
|
 
|
|  
|
Overseas MOON P-7 RS
The RS series of MOON audio components benefit from an even higher standard of manufacturing process
than the regular MOON versions. All significant differences are contained within the circuitry and construction
of each model.
RS versions are built using different materials and parts in certain areas. For example, printed
circuit boards are of a higher temperature grade than that of the military specification FR-4 material
we normally use; Their traces are gold-plated instead of a tin/lead composite. As well, all capacitors
use improved dielectric materials.
MOON RS models meet and/or exceed stricter manufacturing processes as required to pass many
international safety standards such as those imposed by the E-U, Japan and South Korea. Cosmetically, the
ONLY difference is the RS logo on the front panel.
Point-and-click
here
to see the retail pricing structure for the MOON RS series
|
 
|
 
|
Specifications:
|
 
|
| Type |
Solid State |
| Configuration |
Dual-Mono / Fully Balanced |
| Power Supply Transformers |
2 x 10VA (audio);   1 x 10VA (controller) |
| Power Supply Capacitance |
44,000µF |
| Circuit Topology |
Open Loop |
| Balanced Inputs   (XLR) |
2 pairs |
| Single-ended inputs   (RCA) |
4 pairs |
| Input Impedance |
22,000 ohms |
| Input Sensitivity |
200mV - 4.0V RMS |
| Monitor Loop |
1 |
| Balanced Outputs   (XLR) |
1 Pair |
| Single-Ended Outputs   (RCA) |
2 Pairs   (variable & fixed) |
| Output Impedance   (RCA / XLR) |
50 ohms / 100 ohms |
| Volume Steps |
1 dB from 0-30 and 0.5dB from 30-80 |
| Gain Control |
M-eVOL   (R-2R) |
| Gain |
9dB |
| Signal-to-noise Ratio   (20Hz - 20kHz) |
115dB |
| Maximum Output Voltage - XLR |
12 Volts |
| Maximum Output Voltage - RCA |
6 Volts |
| Frequency Response |
5Hz - 100kHz   (+0 / -0.1dB) |
| Crosstalk @ 1kHz |
-115dB |
| IMD |
unmeasurable |
| THD   (20Hz - 20kHz) |
0.002% |
12 Volt Trigger Output Operation
 
 
  |
Direct Logic   (0V = off, 12V=on)   using
a 3.5mm mono microphone jack with an
input impedance of 1000 ohms and current
requirement of 12mA |
| SimLink Port |
1 input + 1 output each on 1/8" mini-jack |
| RS-232 Port |
9-pin female DB connector |
| IR input |
1/8" mini-jack |
| Remote Control |
All-Aluminum Full Function |
| Display Type |
8 character dot matrix LED |
| Power Consumption @ idle |
20 Watts |
| AC Power Requirements |
120V / 60Hz     240V / 50Hz |
| Fuse Replacement - 120V |
0.5A short slow blow |
| Fuse Replacement - 230V |
0.25A short slow blow |
| Shipping Weight |
40 lbs / 18 Kgs |
| Dimensions - Preamp   (w x h x d) |
18.75 x 4 x 16.5 in. |
| Dimensions - Controller / Power Supply |
18.75 x 5.5 x 16.5 in. |
|
 
|
Specifications subject to change without notice.
|
 
|
|
 
|
|
C4 Aesthetics featuring 24 end-user selectable cosmetics combinations
|
|
Chassis Section
|
Standard finish
|
Optional finish
|
|
Brushed/Anodized Face-plate
|
Silver or Black
|
 
|
|
MOON Logo
|
Chrome
|
Gold or Pewter
|
|
Leg Cones
|
Chrome
|
Gold
|
|
Front Panel Cheeks
|
Silver
|
Black
|
|
 
|
|