| |
Analog Input CS5396
Analog-to-Digital 1 |
Digital Input CS43122
Digital-to-Analog 2 |
Analog Pass-Through |
| Frequency Response |
10Hz-20kHz ±0.25dB |
10Hz-20kHz ±0.035dB |
2Hz-96kHz ±1.5dB |
| Signal-to-Noise Ratio @ full output |
> 120dB |
> 120dB |
> 112dB |
| Dynamic Range |
> 120dB |
> 120dB |
> 114dB |
| THD + N |
< -105dB |
< -100dB |
< -112dB |
| Crosstalk |
< -98dB |
< -104dB |
< -108dB |
| Stop-band Attenuation |
< -117dB |
< -102dB |
n/a |
| Pass-band Ripple |
< 0.005dB |
< 0.0008dB |
n/a |
| Phase Linearity |
±0.5° @ 20kHz |
±0.3° @ 20kHz |
n/a |
| High Frequency Jitter @ 20kHz |
< 100 picoseconds rms |
< 100 picoseconds rms |
n/a |
| Low Level Linearity |
< ±1.5dB @ -90dBFS |
< ±1.0dB @ -90dBFS |
n/a |
| |
Note 1: EIAJ, A-weighted, fS = 24-bit/96kHz in 128X oversampling mode
Note 2: EIAJ, A-weighted, fS = 24-bit/96kHz
|
| Maximum Overall Gain |
10dB |
| Volume adjustment |
1.0dB increments |
| THD (20Hz - 20kHz) |
< 0.03% |
| Frequency response |
20Hz - 20kHz ± 0.5dB |
| Signal-to-noise Ratio |
95dB CCIR-ARM |
| Analog input impedance |
15kΩ |
| Analog input sensitivity |
200mV - 3.0V rms |
| Analog output impedance |
600Ω |
| Analog output voltage |
3.5 volts FS |
| Digital Input - S/PDIF |
75Ω / 0.4Vp-p |
| Digital Input/Output - Optical Toslink |
660nm wavelength |
| Video bandwidth - Component |
250MHz |
| Video bandwidth - S-Video & Composite |
130MHz |
| Rear Panel Input Connections |
Audio/Video
(Analog x 7)
|
VCR1
VCR2
TV
LD
AUX
SAT
DVD |
S-Video (Y/C) + Composite video (CVBS) + 2-ch. audio
S-Video (Y/C) + Composite video (CVBS) + 2-ch. audio
S-Video (Y/C) + Composite video (CVBS) + 2-ch. audio
S-Video (Y/C) + Composite video (CVBS) + 2-ch. audio
S-Video (Y/C) + Composite video (CVBS) + 2-ch. audio
Component video + S-Video (Y/C) + (CVBS) + 2-ch. audio
Component video + S-Video (Y/C) + Composite video (CVBS) + 7.1-ch. audio |
Audio
(Analog x 2) |
CD
TAPE |
2-ch. audio
2-ch. audio |
| Digital x 6 |
DIG1-4
DIG5-6 |
4 x RCA (S/PDIF)
2 x Toslink (Optical) |
| 2nd Zone (Analog x 1) |
ZONE-2 |
2-ch. audio |
| Rear Panel Output Connections |
| Main Out |
7.1 ch. audio (center, LFE, front L+R, surround L+R, rear L+R)
1 x Component video
1 x S-Video (Y/C)
2 x Composite video (CVBS) |
| Record Out |
2 x 2 ch. audio
2 x S-Video (Y/C)
2 x Composite video (CVBS)
1 x Digital Toslink (Optical) |
| 2nd Zone |
1 x Variable 2 ch. audio
1 x Fixed 2 ch. audio |
| Triggers |
1 x Main Zone (Dry contact)
1 x 2nd Zone (Dry contact)
1 x Amplifier (12 Volt) |
Notes: |
Any of the 9 analog A/V input names may be re-assigned in the setup.
Any of the 6 digital inputs may be assigned to any of the 9 A/V inputs in the setup.
All 2-channel & 7.1-channel audio connections use single-ended RCA connectors.
All Composite & Component video connections use RCA connectors.
|
| Frequency tuning range |
87.5 - 108.1MHz |
520 - 1720kHz |
| 50dB quieting sensitivity |
37dBf |
- |
| Capture Ratio |
< 1.6dB |
- |
| AM rejection |
60dB |
- |
| THD @ 1kHz |
0.1% (Stereo) |
0.5% |
| I.F. rejection |
90dB |
35dB |
| Image rejection |
80dB |
45dB |
| Selectivity |
58dB |
30dB |
| S/N ratio |
74dB (Stereo) |
45dB |
| Stereo separation |
45dB @ 1kHz |
- |
| Miscellaneous Information |
| Available Faceplate Finishes |
Black and Silver |
| Remote Control |
Full-Function & Basic Function |
| Display Type |
VFD (Vacuum Flourescent Display) |
| Front Panel Controls |
Stand by ·
Stereo ·
Surround ·
AM/FM ·
Seek + ·
Seek - ·
Volume + ·
Volume - ·
Input + ·
Input - ·
Mute ·
2nd Zone |
| Rack mount size |
3 spaces |
| Power Consumption |
24 Watts |
| AC Power Requirements |
100 - 240V / 50 or 60Hz (Switch Mode power supply) |
| Fuse Replacement |
1A short fast blow (120V & 230V) |
| Warranty (USA & Canada) |
5 Years - transferable |
| Shipping weight |
25 lbs / 11 Kg |
| Dimensions (W x H x D) |
19 x 6-1/2 x 14 in. (48 x 16.5 x 35.5 cm.) |
Features & specifications are subject to change without notice.
|
