| Type |
Solid State |
| Configuration |
3 or 5 channels |
| Power Supply Transformer(s) |
2 x 1.1kVA |
| Power Supply Capacitance |
216,000µF |
| Class Of Operation |
A/AB |
| RCA Input |
1 per channel |
| Balanced Input |
1 XLR per channel |
| Input Impedance |
24,900 Ω |
| Input Sensitivity |
1420mV RMS |
| Output Device Type |
Bipolars - 8 per channel |
| Output Binding Posts |
5-way / Gold-plated / Shielded |
| Output Power @ 8 Ω |
200 Watts |
| Output Power @ 4 Ω |
400 Watts |
| Frequency Response |
10Hz - 100kHz +0/-3dB |
| Output Impedance |
0.01 Ω |
| Damping Factor (static) |
800 |
| Signal-to-noise Ratio |
100dB @ full power |
| Maximum Output Voltage |
42 Volts |
| Slew Rate |
80V/µs |
| Maximum Current - Peak / Continuous |
30 amperes / 15 amperes |
| Crosstalk @ 1kHz |
-90dB |
| Intermodulation Distortion |
Unmeasureable |
| THD @ 1 watt / @ 200 watts (20Hz-20kHz) |
< 0.02 % / < 0.05 % |
12 Volt Trigger Operation
|
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
300 Ω and current requirement of 40mA |
| Available Faceplate Finishes |
Black and Silver |
| Power Consumption @ idle |
75 Watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Fuse Replacement - 120V 3/5-ch |
long fast blow - 8A / 10A |
| Fuse Replacement - 230V 3/5-ch |
long fast blow - 4A / 6A |
| Shipping weight 3-channel |
75 lbs / 34 kgs |
| Shipping weight 5-channel |
104 lbs / 46 kgs |
| Dimensions (W x H x D) |
19 x 12 x 19 in. (49 x 31 x 49 cm.) |
Features & specifications are subject to change without notice.
|
Close this window