| Type |
Solid State |
| Configuration |
Stereo |
| Power Supply Transformer |
1.1kVA |
| Power Supply Capacitance |
108,000µF |
| Class Of Operation |
A/AB |
| Single-ended Inputs |
RCA - 2 pairs (normal & phase inverted) |
| Balanced Inputs |
XLR - 1 pair |
| Input Device Type |
J-FETs |
| Input Impedance |
47,500 ohms |
| Input Sensitivity |
900mV RMS |
| Output Device Type |
Bipolars - 8 per channel |
| Output Binding Posts |
WBT |
| Output Power @ 8 ohms |
120 Watts |
| Output Power @ 4 ohms |
240 Watts |
| Output Power @ 2 ohms |
400 Watts |
| Output Power - Bridged Mono |
400 Watts |
| Frequency Response |
10Hz - 125kHz +0/-3dB |
| Output Impedance |
0.01 ohms |
| Damping Factor (static) |
800 |
| Gain |
31dB |
| Dynamic Headroom |
6dB |
| Signal-to-noise Ratio |
100dB @ full power |
| Maximum Output Voltage |
32 Volts |
| Slew Rate |
35V/µs |
| Maximum Current - Peak |
36 amperes |
| Maximum Current - Continuous |
18 amperes |
| Crosstalk @ 1kHz |
-90dB |
| IMD |
Unmeasureable |
| THD (20Hz - 20kHz @ 1 watt) |
< 0.02 % |
| THD (20Hz - 20kHz @ 120 watts) |
< 0.05 % |
OPTIONAL
12 Volt Trigger Operation
|
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
2K ohms and current requirement of 6mA |
| Available Faceplate Finishes |
Black and Silver |
| Power Consumption @ idle |
40 Watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Fuse Replacement - 120V |
6A long fast blow |
| Fuse Replacement - 230V |
3A long fast blow |
| Warranty (USA & Canada) |
10 years |
| Shipping weight |
48 lbs / 21 Kgs |
| Dimensions (W x H x D) |
19 x 7.5 x 14 in. (49 x 19 x 36 cm.) |
Features & specifications are subject to change without notice.
|
