| Type |
Solid State |
| Configuration |
Mono |
| Power Supply Transformers |
1.1kVA |
| Power Supply Capacitance |
108,000µF |
| Class Of Operation |
A/AB |
| RCA Inputs |
1 pair (normal & phase inverted) |
| Balanced Input |
XLR |
| Input Device Type |
J-FETs |
| Input Impedance |
47,500 ohms |
| Input Sensitivity |
820mV RMS |
| Output Device Type |
Bipolars - 16 |
| Output Binding Posts |
WBT |
| Output Power @ 8 ohms |
425 Watts |
| Output Power @ 4 ohms |
650 Watts |
| Frequency Response |
10Hz - 125kHz +0/-3dB |
| Output Impedance |
0.005 ohms |
| Damping Factor (static) |
1600 |
| Gain |
37dB |
| Dynamic Headroom |
6dB |
| Signal-to-noise Ratio |
100dB @ full power |
| Maximum Output Voltage |
60 Volts |
| Slew Rate |
70V/µs |
| Maximum Current - Peak |
68 amperes |
| Maximum Current - Continuous |
32 amperes |
| Crosstalk @ 1kHz |
Not applicable |
| IMD |
Unmeasureable |
| THD (20Hz - 20kHz @ 1 watt) |
< 0.02 % |
| THD (20Hz - 20kHz @ 425 watts) |
< 0.05 % |
OPTIONAL
12 Volt Trigger Operation
|
Direct Logic (0V = off, 12V=on) using a
1/8" mini-jack with an input impedance of
2K ohms and current requirement of 6mA |
| Available Faceplate Finishes |
Black and Silver |
| Power Consumption @ idle |
40 Watts |
| AC Power Requirements |
120V / 60Hz 240V / 50Hz |
| Fuse Replacement - 120V |
8A long fast blow |
| Fuse Replacement - 230V |
4A long fast blow |
| Warranty (USA & Canada) |
10 years |
| Shipping weight |
50 lbs / 22 Kgs each |
| Dimensions (W X H X D) |
19 x 7.5 x 14 in. (49 x 19 x 36 cm.) |
Features & specifications are subject to change without notice.
|
