MOON EVOLUTION SERIES
 
W-7 Dual-Mono Power Amplifier   Specifications

 
 
Type Solid State
Configuration Dual-Mono / Fully Balanced
Power Supply Transformers 2 x 0.5kVA
Power Supply Capacitance 115,520µF
Class Of Operation A/AB
Balanced Inputs XLR - 1 pair
Single-ended Inputs RCA - 1 pair
Input Device Type J-FETs
Input Impedance 47.5 KΩ
Input Sensitivity 980mV RMS
Output Device Type Bipolars - 12 per channel
Output Binding Posts WBT - 1 pair per channel
Output Power @ 8 Ω 150 Watts
Output Power @ 4 Ω 300 Watts
Output Power @ 2 Ω 600 Watts
Output Power - Bridged Mono 600 Watts
Frequency Response 10Hz - 200kHz   (+0/-3dB)
Output Impedance < 0.01
Damping Factor   (static) > 800
Gain 31dB
Signal-to-noise Ratio 106dB @ full power
Maximum Output Voltage 34 Volts
Slew Rate 42 V/µs
Maximum Current - Peak 42 amperes
Maximum Current - Continuous 18 amperes
Crosstalk @ 1kHz -105dB
IMD Unmeasureable
THD   (20Hz - 20kHz @ 1 watt) 0.015 %
THD   (20Hz - 20kHz @ 150 watts) 0.04 %

 
12 Volt Trigger Operation
 
 
Direct Logic   (0V = off, 12V=on)   using a
1/8" mini-jack with an input impedance of
1K Ω and current requirement of 12mA
RS-232 Port 9-pin female DB connector

 
Power Consumption @ idle 40 watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 8A long fast blow
Fuse Replacement - 230V 4A long fast blow
Shipping weight 85 lbs / 38 kgs
Dimensions   (w x h x d) 18.8 x 7.4 x 17.5 in.

    Features & specifications are subject to change without notice.

 
Open printer friendly PDF                               Close this window