MOON i-1 Stereo Integrated Amplifier


 
 



The MOON i-1 delivers "audiophile" performance in an affordable and elegant package. Designed with numerous convenient features, this integrated amplifier will provide for years of hassle-free musical enjoyement. Over a quarter century of experience in the design and manufacturing of award wininng high-performance audio components has paved the way for the new MOON i-1. Using numerous technologies found in our other highly sought after integrated amplifiers, the i-1 produces an astonishing level of sonic performance with no equal in its price range.

  


 
Significant Design Features

An oversized power supply using a custom toroidal transformer design · Rated output of 50 watts/channel into 8 ohms and 100 watts/channel into 4 ohms · Six line-level inputs including one front-mounted 1/8” mini-jack for personal media players · Headphone output on ¼” TRS jack located on the front panel · Remote control operation · RS-232 port for i) full unsolicited bidirectional feedback in custom installation setups and ii) firmware updates · IR input for external control · A single pair of bipolar output devices in the amplification section · Class A output to 5 watts for greater efficiency · Circuit board with pure copper tracings and gold plating that yields low impedance characteristics · Optimized selection of very high quality electronic components · Heat-sink free design incorporating an all-aluminum chassis for evenly distributed heat dissipation · Rigid chassis construction to minimize the effects of external vibrations · Designed to be powered up at all times for optimal performance · Low operating temperature for a longer than normal life expectancy.






 




  Specifications:

  
Type Solid State
Configuration Stereo
Power Supply Transformer 320VA
Power Supply Capacitance 20,000µF
Class of operation - Amplifier A/AB
Single Ended Inputs   (RCA) 5 pairs
Input Device Types - preamp J-FET
Input Sensitivity 370mV - 3.0V RMS
Input Impedance 11,000 ohms
Tape Output 1 pair
Preamplifier Output 1 pair
Output Device Types - Amplifier Bipolars - 1 per channel
Output Binding Posts shielded
Output Power @ 8 ohms 50 Watts per channel
Output Power @ 4 ohms 100 Watts per channel
Output Impedance 0.04 ohms
Damping Factor > 200
Gain 37dB
Dynamic Headroom 3dB
Signal-to-noise Ratio 101dB @ full power
Maximum Output Voltage 22 Volts
Slew Rate 20V/µs
Maximum Current - Peak 15 amperes
Maximum Current - Continuous 9 amperes
Frequency Response 10Hz - 100kHz   (+0/-3dB)
Crosstalk @ 1kHz -78dB
IMD < 0.05%
THD   (20Hz - 20kHz @ 1 watt) < 0.015%
THD   (20Hz - 20kHz @ 50 watts) < 0.02%
 
Available Faceplate Finishes Black and Silver
Remote Control Full Function
Power Consumption @ idle 11 Watts
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V 4A long fast blow
Fuse Replacement - 230V 2A long fast blow
Shipping weight 22 lbs / 10 kgs
Dimensions   (W x H x D) 16.88 x 3.5 x 14.75 in.   (42.9 x 8.9 x 37.5 cm.)

        Specifications are subject to change without notice.


Close this window                             Print this page