MOON CLASSIC SERIES
P-3 Stereo Preamplifier

 

 


This single chassis preamplifier offers a great deal of functionality including eight inputs, a tape monitor loop, a home theater ready input, both single-ended & balanced outputs, a headphone output and remote control operation.   Built to the same standards as the more expensive MOON P-5 and employing "Class A" circuit topology, this unit is targeted at those who demand greater flexibility.

 




  Significant Design Features

An oversized power supply · A custom proprietary toroidal transformer design with lower magnetic, electrical and thermal loss, yielding an improved power transfer and lower regulation factor, resulting in increased current speed and better dynamics · An extremely short capacitor-free signal path measuring only 11 inches in length · Class A circuit topology · Gain section using a Crystal microprocessor functioning as a "shunt to ground" that doesn't degrade sonic performance regardless of the setting · J-FET input devices and MOSFET output devices · Accurate matching of the very finest high quality electronic components · One single-ended audio input which bypasses the gain stage to accomodate a component, such as home-theater processor, whose own volume control is used instead   ·     Pure copper circuit board tracings with extremely low impedance characteristics · A symmetrical circuit design · Extremely rigid chassis construction to minimize the effects of external vibrations · Improved reliabilty through the elimination of moving parts · Designed to be powered up at all times for optimal performance · Low operating temperature for a longer than normal life expectancy.

 



  Specifications:

 
Type Solid State
Configuration Stereo
Power Supply Transformer .2kVA
Power Supply Capacitance 12,000µF
Class Of Operation Class A
Design Feedback differential
Single-ended inputs   (RCA) 8 pairs
Balanced Inputs   (XLR) None
Input Device Types J-FET
Input Impedance 13,000 ohms
Input Sensitivity 200mV - 3.0V RMS
Tape Output 1
Tape Monitor Loop Yes
Output Device Types MOSFET
Balanced Outputs   (XLR) 1 Pair
Single-Ended Outputs (RCA) 1 Pair
Output Impedance - Balanced 50 ohms
Output Impedance - Single Ended 100 ohms
Gain Control RBG cs version
Gain - Balanced 9.5dB
Gain - Single Ended 6.5dB
Signal-to-noise Ratio 85dB @ full output
Maximum Output Voltage - XLR 8 Volts
Maximum Output Voltage - RCA 4 Volts
Frequency Response 20Hz - 20kHz   (+0 / -0.1dB)
Crosstalk @ 1kHz -56dB
IMD unmeasurable
THD   (20Hz - 20kHz) 0.03%
Headphone output 1   (on rear panel)
 
Available Faceplate Finishes Black and Silver
Remote Control All-Aluminum Simple Function
AC Power Requirements 120V / 60Hz     240V / 50Hz
Fuse Replacement - 120V & 230V 1A long slow blow
Number of Chassis 1
Warranty   (USA & Canada) 10 years
Shipping Weight 22 lbs / 10 kgs
Dimensions   (W x H x D) 17 x 4 x 15 in.   (43 x 10 x 38 cm.)

        Specifications are subject to change without notice.


Close this window                             Print this page