PRODUCTS
  New Products
  MOON Evolution Series
  MOON Series
  Older Products
    SIMA Index
 
      P-20 / W-200
      PW-2000 / PW-3000
      P-2001 / P-3001
      W-2002 / W-2003
      W-2050 / W-3050

 
INFORMATION
  Simaudio News
  Press Releases
  Product Awards
  Product Reviews
  Education
  Literature
  Recommended Music

 
COMPANY
  Background
  Green Practices
  Factory Tour
  Photo Gallery
  Unauthorized Sales
  Career Opportunities
  Contact Us

 
SUPPORT
  Where To Buy
  Product Registration
  Warranties
  Owner's Manuals
  F A Q
  Factory Upgrades
  Service
SIMA PW-2000 & PW-3000 Integrated Amplifiers


SIMA PW-2000 Integrated Amplifier


SIMA PW-3000 Integrated Amplifier

The SIMA PW-2000 and PW-3000 (both pictured above, respectively) were the integrated amplifiers throughout the SIMA brand name's existence. The PW-2000 produced 40 watts per channel and the PW-3000, 50 watts per channel (both into 8 ohms). Both units came equipped with user adjustable internal phono sections (moving magnet & moving coil). Later production units of the PW-3000, designated the "se" version produced higher output current and used an improved gain section.


Specifications
MODEL PW-2000 PW-3000 & PW-3000se
Production Dates 1980 - 1984 1985 - 92   &   1993 - 94
Type Solid State Solid State
Configuration Stereo Stereo
Class Of Operation - Preamp A - Feedback differential A - Feedback differential
Class Of Operation - Amplifier AB A/AB
Line Level Inputs 3 3
Tone Controls Yes - defeatable No
Headphone output Yes No
Input Devices - Preamp J-FET J-FET
Output Devices - Preamp MOSFET MOSFET
Input Sensitivity 200mV - 3.0V 200mV - 3.5V
Input Impedance 12,000 ohms 12,000 ohms
Tape Loop 1 1
Preamplifier Output No No
Output Devices - Amp Bipolars - 2/channel Bipolars - 2/channel
Output Power @ 8 ohms 40 Watts 50 Watts
Output Power @ 4 ohms 75 Watts 85 Watts
Output Impedance 0.04 0.02
Damping Factor >200 >400
Gain 26dB 30dB
Dynamic Headroom 6dB 6dB
Signal-to-noise Ratio > 85dB > 88dB
Maximum Output Voltage 10.5 18
Slew Rate 15V/µs 18V/µs
Maximum Peak Current 12 amperes 16 amperes
Bandwidth +0/-3dB 10Hz - 60kHz 1Hz - 80kHz
Crosstalk @ 1kHz -55dB -55dB
Intermodulation Distortion < 0.09% < 0.09%
THD (20Hz - 20kHz @ 1 watt) < 0.08 % < 0.09 %
Phono Section Internal MM & MC Internal MM & MC
Shipping weight 17 lbs 15 lbs
Dimensions 17 x 2.75 x 8.75 in. 17 x 2.75 x 8.75 in.
 
Phono Section Specifications MM / MC MM / MC
Input Sensitivity   (for 1V output) 2.0mV / 200µV 2.8mV / 200µV
Bandwidth  ±0.3dB 30Hz - 20kHz 30Hz - 20kHz
Gain 40dB / 50dB 40dB / 54dB
Crosstalk   (20Hz - 20kHz) > 90dB > 95dB
THD < 0.05 < 0.05
Maximum input level   (at 1kHz) 210mV / 21mV 160mV / 11mV
S/N Ratio 77dB / 65dB 80dB / 66dB
Input Impedance 47k ohms / 100 ohms 47k ohms / 100 ohms
Max. output (1kHz @ 10Kohms) 10 V rms 10.5 V rms

 

 
Point-and-click here to return to the top of this page